Tiger Cub T20W 1960
The image above is from a brochure produced for the U.S.A., which combined both the T20/T Trials and Woods model together.
Very little information exists solely on the T20W 'Woods' model apart from it was manufactured for reliability trials and general cross country events.
It was fitted with Trials Universal tyres, a high level exhaust system, wide-ratio gear cluster, a low compression piston, standard T20 Cub camshaft and 18 mm Zenith carburettor.
If anyone has any more information, please do get in touch - [email protected]
Specifications for 1960
Engine
Type: Single-cylinder OHV, unit construction
Capacity: 199cc (12.1 cu in)
Bore/Stroke: 63mm (2.480in) x 64mm (2.520in)
Compression: not known
Power: not known
Carburettor: 18 mm Zenith model
Camshaft: Standard - valve clearances In & Ex 0.010in (cold)
Clutch: Wet multiplate
Gears: 4
Cycle Parts
Front Suspension: Telescopic forks, hydraulic damped
Rear Suspension: Swing-arm
Front Wheel: 19 inch (WM1 rim)
Rear Wheel: 18 inch (WM2 rim)
Front Tyre: 3.00 x 19
Rear Tyre: 3.50 x 18
Brakes: 5.5 in dia. Single leading shoe drum front and rear
Petrol Tank: 2 5/8 gallons
Oil tank - 2 3/4 pints
Gearbox - 1/3 pint
Primary chaincase - 1/3 pint
Front Fork: 1/4 pint
Electrics
Type: Lucas Energy Transfer
Voltage: 6
Charging Type: RM 13 Alternator
Ignition Timing: 4 degrees BTDC static. 28 degrees fully advanced
Points Gap: 0.014in - 0.016in
Spark Plug: Champion L7 or equivalent
Spark Plug Gap: 0.020in
Very little information exists solely on the T20W 'Woods' model apart from it was manufactured for reliability trials and general cross country events.
It was fitted with Trials Universal tyres, a high level exhaust system, wide-ratio gear cluster, a low compression piston, standard T20 Cub camshaft and 18 mm Zenith carburettor.
If anyone has any more information, please do get in touch - [email protected]
Specifications for 1960
Engine
Type: Single-cylinder OHV, unit construction
Capacity: 199cc (12.1 cu in)
Bore/Stroke: 63mm (2.480in) x 64mm (2.520in)
Compression: not known
Power: not known
Carburettor: 18 mm Zenith model
Camshaft: Standard - valve clearances In & Ex 0.010in (cold)
Clutch: Wet multiplate
Gears: 4
Cycle Parts
Front Suspension: Telescopic forks, hydraulic damped
Rear Suspension: Swing-arm
Front Wheel: 19 inch (WM1 rim)
Rear Wheel: 18 inch (WM2 rim)
Front Tyre: 3.00 x 19
Rear Tyre: 3.50 x 18
Brakes: 5.5 in dia. Single leading shoe drum front and rear
Petrol Tank: 2 5/8 gallons
Oil tank - 2 3/4 pints
Gearbox - 1/3 pint
Primary chaincase - 1/3 pint
Front Fork: 1/4 pint
Electrics
Type: Lucas Energy Transfer
Voltage: 6
Charging Type: RM 13 Alternator
Ignition Timing: 4 degrees BTDC static. 28 degrees fully advanced
Points Gap: 0.014in - 0.016in
Spark Plug: Champion L7 or equivalent
Spark Plug Gap: 0.020in